Pass4Test possède un l'outil de formation particulier à propos de test Symantec 250-270. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Symantec 250-270 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
C'est sûr que le Certificat Symantec 250-270 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test Symantec 250-270, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat Symantec 250-270 peut bien tester la professionnalité de IT.
Si vous faites toujours la lutte contre le test Symantec 250-270, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Symantec 250-270. Si vous avez déjà décidé à s'améliorer via Symantec 250-270, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Symantec 250-270 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Symantec 250-270, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Symantec 250-270 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
L'équipe de Pass4Test rehcerche la Q&A de test certification Symantec 250-270 en visant le test Symantec 250-270. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Symantec 250-270 sans aucune doute.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Symantec 250-270. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Code d'Examen: 250-270
Nom d'Examen: Symantec (Administration of Symantec NetBackup 7.0 for Unix)
Questions et réponses: 237 Q&As
250-270 Démo gratuit à télécharger: http://www.pass4test.fr/250-270.html
NO.1 In a Symantec NetBackup 7.0 environment, where does the image database reside?
A. within the EMM database
B. on the media server
C. on the master server
D. within the master server's Sybase database
Answer: C
Symantec 250-270 examen 250-270 250-270 examen certification 250-270
NO.2 An organization has Symantec NetBackup 7.0 client machines with a large number of files distributed
across multiple file systems that are being backed up to a library with high-speed tape drives.
Which two steps should the administrator take to ensure the greatest number of backup streams are
active concurrently? (Select two.)
A. select the "Enable multiple data streams" policy attribute and edit the "Maximum jobs per client" master
server host property
B. create a "Media Server Load Balancing" type storage unit group to enable additional backup streams to
become active simultaneously
C. enable the client-side deduplication feature so that only unique data is sent from the client to the media
server
D. select the Enable multiplexing attribute within the storage unit and the policy schedule
E. configure the "Max drives this master" attribute to the number of tape drives that are available within
the library
Answer: AD
Symantec 250-270 250-270 certification 250-270
NO.3 An administrator successfully creates a disk pool for Symantec NetBackup 7.0, then attempts to
create a new storage unit using the bpstuadd command. In the bpstuadd command, the storage unit
name is specified as diskpool1_storageunit-#01. An error message is returned indicating the storage unit
name is invalid.
How should the storage unit name be modified to fix the problem?
A. remove the "-" from the name
B. remove all the numbers from the name
C. remove the "#" from the name
D. shorten the name to fewer than twenty characters
Answer: C
certification Symantec 250-270 examen 250-270 certification 250-270 certification 250-270
NO.4 Which two statements are true about the function of the Initiate Import utility in Symantec Netbackup
7.0? (Select two.)
A. Phase I creates a list of expired images.
B. Phase II lists and creates image files from tape or disk.
C. Phase I reads and creates image files in the image database.
D. Phase I requires each tape to be mounted if tape media is used.
E. Phase II imports the backups and creates fragments.
Answer: AD
Symantec 250-270 250-270 examen certification 250-270 certification 250-270 250-270 examen
NO.5 Which two items are required to use the Catalog Recovery Wizard? (Select two.)
A. BMR file
B. media used for the catalog backup
C. catalog backup policy
D. DR file
E. critical policy list
Answer: BD
certification Symantec certification 250-270 250-270 examen
NO.6 A company has just expanded the Symantec NetBackup 7.0 environment by adding an additional
media server.
What is the fastest way to update several hundred Symantec NetBackup clients with the new media
server information?
A. run the update_all_clients script
B. run the add_media_server_on_clients script
C. specify the new media server in the Backup, Archive, and Restore interface
D. specify the new media server in the client properties
Answer: B
certification Symantec 250-270 certification 250-270 250-270
NO.7 The configuration parameters MIN_GB_SIZE_PER_DUPLICATION_JOB and
IMAGE_EXTENDED_RETRY_PERIOD_IN_HOURS are part of the configuration for which feature?
A. Catalog Replication
B. FlashBackup
C. Storage Lifecycle Policy
D. NetBackup Vault
Answer: C
Symantec 250-270 examen 250-270 examen
NO.8 An administrator is remotely logged into a Symantec NetBackup 7.0 server via the terminal window
and needs to configure robots and drives.
Which command should be used to complete the configuration?
A. vmconf
B. tpreq
C. nbdevconfig
D. tpconfig
Answer: D
Symantec certification 250-270 250-270 250-270
NO.9 Which two media status designations are excluded in the count against maximum number of partially
full media? (Select two.)
A. Frozen
B. Imported
C. Active
D. Available
E. Inactive
Answer: AB
Symantec 250-270 250-270 examen 250-270
NO.10 A tape library had the robot firmware upgraded and now the robot is reading the barcodes with
additional characters.
What can be set so that Symantec NetBackup 7.0 uses the same characters as before the firmware
upgrade occurred?
A. Media ID generation
B. Media ID display
C. media type mapping
D. barcode rules
Answer: A
Symantec 250-270 250-270 250-270 examen
NO.11 A Symantec NetBackup 7.0 environment uses a multi-tiered architecture.
Which system functions as the top tier?
A. media server
B. enterprise client
C. client
D. master server
Answer: D
Symantec 250-270 250-270 certification 250-270 250-270
NO.12 A restore must be performed. The administrator is trying to view the valid images for a client, but the
following error occurs:
WARNING: Server does not contain any valid images.
Which two may be incorrectly configured? (Select two.)
A. schedule type for restores
B. destination client for restores
C. server to use for backups and restores
D. media server for backups and restores
E. policy types for restore
Answer: CE
certification Symantec 250-270 examen 250-270 certification 250-270 250-270 250-270
NO.13 Which two types of information are displayed in the Tape Summary report? (Select two.)
A. the number of tapes that are suspended
B. the number of tapes that are offsite
C. the number of tapes that are using compression
D. the number of tapes that are active
E. the number of tapes each client is using
Answer: AD
Symantec examen 250-270 250-270 certification 250-270 250-270
NO.14 Which two databases are used by Symantec NetBackup 7.0? (Select two.)
A. Media
B. Image
C. Volume
D. EMM
E. Device
Answer: BD
Symantec 250-270 250-270
NO.15 An administrator has created three BasicDisk storage units within the NetBackup Administration
Console (STU-A, STU-B, and STU-C). The administrator needs to create a backup policy that evenly
rotates use of each of these storage units during backup.
How can the policies or storage units be set up to accomplish this?
A. set up each of the policies to use "Any Available" storage unit
B. set up a storage unit group for these STUs and select "Failover" option for storage unit selection
C. set up a storage unit group for these STUs and select "Least recently selected storage unit" option
D. set up a storage unit group for these STUs and select "Choose storage units based on order specified
above" option
Answer: C
Symantec 250-270 certification 250-270
NO.16 Catalog configuration can be configured to email which file to aid in catalog recovery?
A. BMR file
B. master server config file
C. support script output
D. DR file
Answer: D
Symantec 250-270 250-270 examen
NO.17 Which Symantec NetBackup 7.0 volume pool is created by default?
A. Data
B. Scratch
C. None
D. Catalog
Answer: C
Symantec examen 250-270 examen 250-270 certification 250-270 250-270 examen 250-270 examen
NO.18 Where are exclude list configurations stored?
A. media server
B. master server
C. client
D. Enterprise Media Manager (EMM) server
Answer: C
Symantec examen 250-270 certification 250-270 certification 250-270
NO.19 How long will a failed restore job remain in an Incomplete state prior to being moved to a Done state?
A. one day
B. three days
C. seven days
D. until the administrator cancels the restore job
Answer: C
certification Symantec 250-270 250-270 250-270
NO.20 A collection of all backup data from a client is assembled into a single stream and written to tape or
disk.
What is this called?
A. file metadata
B. backup policy
C. catalog .f file
D. backup image
Answer: D
Symantec certification 250-270 250-270 examen 250-270
Pass4Test peut offrir nombreux de documentations aux candidats de test Symantec 250-270, et aider les candidats à réussir le test. Les marétiaux visés au test Symantec 250-270 sont tout recherchés par les experts avec leurs connaissances professionnelles et les expériences. Les charactéristiques se reflètent dans la bonne qualité de Q&A, la vitesse de la mise à jour. Le point plus important est que notre Q&A est laquelle le plus proche du test réel. Pass4Test peut vous permettre à réussir le test Symantec 250-270 100%.
没有评论:
发表评论