Le programme de formation IBM 000-277 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM 000-277, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM 000-277 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM 000-277 sans aucune doute.
La Q&A IBM 000-277 de Pass4Test est liée bien avec le test réel de IBM 000-277. La mise à jour gratuite est pour vous après vendre. Nous avons la capacité à vous assurer le succès de test IBM 000-277 100%. Si malheureusement vous échouerez le test, votre argent sera tout rendu.
Code d'Examen: 000-277
Nom d'Examen: IBM (IBM WebSphere Message Broker V8.0 System Administration)
Questions et réponses: 55 Q&As
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
On peut voir que beaucoup de candidats ratent le test IBM 000-277 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test IBM 000-277 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test IBM 000-277, Pass4Test peut offrir les Q&As des autres test Certification IT.
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
La grande couverture, la bonne qualité et la haute précision permettent le Pass4Test à avancer les autre sites web. Donc le Pass4Test est le meilleur choix et aussi l'assurance pour le succès de test IBM 000-277.
000-277 Démo gratuit à télécharger: http://www.pass4test.fr/000-277.html
NO.1 A system administrator was asked to create a security identity "ftp::FTP1" associated with a
user ftpuser1 and its password password1. The message flow containing the FileOutput node with
the correct ftp credentials has been deployed to the broker BRK1 on Linux system already. The
system administrator ran the command: mqsisetdbparms BRK1 -n ftp::FTP1 -u ftp\user1 -p
password1 When the transaction was processed, the output file was not generated on the ftp server
and the failure reported incorrect user credentials. What did the system administrator do wrong?
A. Supplied incorrect userId and password in the command.
B. Used the incorrect format of security identity in the command.
C. Added the extra escape character with -u option in the command.
D. Did not add an extra escape character with -u option in the command.
Answer: D
certification IBM 000-277 000-277 examen 000-277 certification 000-277
NO.2 A company has the requirement to have their message flow application running on broker
BRK1 communicate with the CICS Transaction Server. The message flow application contains
CICSRequest node that has security identity defined as mySecurityIdentity. The CICS Transaction
server only accepts the transactions from applications if they are sent by the userId user1 with
password password1. Which command does the system administrator need to run to set the userId
and password on the broker?
A. mqsisetdbparms BRK1 -n SecurityIdentity -u user1 -p password1
B. mqsisetdbparms BRK1 -n mySecurityIdentity -u user1 -p password1
C. mqsisetdbparms BRK1 -n cics::SecurityIdentity -u user1 -p password1
D. mqsisetdbparms BRK1 -n cics::mySecurityIdentity -u user1 -p password1
Answer: D
IBM 000-277 certification 000-277 000-277
NO.3 A system administrator configures a message flow security to perform the end-to-end
processing of all identity credentials that are carried in a message through a message flow using IBM
Tivoli Federated Identity Manager (TFIM). Which of the following three tasks performed by the
security manager require the use of TFIM? (choose 3)
A. Authenticate the identity.
B. Enable default propagation.
C. Map the identity to an alternative identity.
D. Extract the identity from an inbound message.
E. Propagate either the alternative identity or the original identity with an outbound message.
F. Check that either the alternative identity or the original identity is authorized to access the
message flow.
Answer: A,C,F
IBM 000-277 000-277 examen
NO.4 A system administrator is asked to assist a developer who has setup a message flow that uses
an HTTP Input node to securely process SOAP messages deployed to run on LINUX broker BRK1.
After xdeploying the flow into the production environment, the application invoking the flow is
receiving a failure response. What should the system administrator do to get the developer to
understand the security exception? Have the developer:
A. change the validation property to Content and Value.
B. change the identity token type on HTTP Input node to Username.
C. change the Fault format property of the HTTP Input Node to SOAP1.2 and retest the failing
request.
D. set Treat Security Exceptions as normal exceptions property of the HTTP Input Node, redeploy
the message flow and retest failingrequest.
Answer: D
IBM examen 000-277 examen 000-277 examen 000-277 examen
NO.5 A message flow needs to be secured based on the identity credentials. A system administrator
is asked to configure the message flow security for authorization, identity mapping and
authentication. Which one of the following external security providers can the system administrator
use?
A. WS-Trust V1.3
B. WS-SecurityPolicy V1.2
C. IBM Tivoli Federated Identity Manager V6.0
D. Lightweight Directory Access Protocol (LDAP) V3
Answer: A
certification IBM 000-277 000-277 000-277 certification 000-277 000-277
NO.6 A development team has been notified that all the requests serviced by their SOAPInput node
message flow will now contain wsse headers for authentication, encryption and signatures. The
system administrator created the security profile with authentication set to use LDAP and asked the
development team to associate the flow's BAR file with the security profile and redeploy it to the
broker. When the requests were sent to the broker, they were not processed. What did the system
administrator miss?
The system administrator missed: 1. creating the policy set
A. 2. creating the consumer policy set binding3. putting key information in the policy set4. adding
the private keys to the keystore5. pointing the broker to it and giving the names of the policy set
and the policy set binding to the developers forassociating them with the BAR file before the
redeploy
B. 2. creating the provider policy set binding3. putting the key information in the policy set binding4.
adding the private keys only to the keystore5. pointing the broker to it and giving the names of the
policy set and the policy set binding to the developers forassociating them with the BAR file before
the redeploy
C. 2. creating the consumer policy set binding3. putting the key information in the policy set4.
adding the private and public keys to the keystore and truststore5. pointing the broker to them and
giving the names of the policy set and the policy set binding to the developers forassociating them
with the BAR file before the redeploy
D. 2. creating the provider policy set binding3. putting the key information in the policy set binding4.
adding the private and public keys to the keystore and truststore5. pointing the broker to them and
giving the names of the policy set and the policy set binding to the developers forassociating them
with the BAR file before the redeploy
Answer: D
certification IBM 000-277 000-277 examen 000-277 certification 000-277
NO.7 A system administrator is configuring Public Key Infrastructure (PKI) for an execution group
EG1 that is deployed to broker BRK1. The development team informed the system administrator
that their requirement is to send the SOAP requests to an external web service provider. The
provider only receives https requests and requires to authenticate the broker requests as well.
Which commands does the system administrator need to run to configure PKI at the execution
group level?
A. mqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n keystoreFile -v
keystore.jksmqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n truststoreFile -v
truststore.jks
B. mqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n keystoreFile -v
keystore.jksmqsichangeproperties BRK1 -e EG1 -o HTTPSConnector -n truststoreFile -v truststore.jks
C. mqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n keystoreFile -v
keystore.jksmqsichangeproperties BRK1 -o BrokerRegistry -n brokerTruststoreFile -v truststore.jks
D. mqsichangeproperties BRK1 -o BrokerRegistry -n brokerKeystoreFile -v
keystore.jksmqsichangeproperties BRK1 -o BrokerRegistry -n brokerTruststoreFile -v truststore.jks
Answer: A
certification IBM 000-277 examen 000-277 examen 000-277 000-277
NO.8 The broker administration security has been set up on a broker BRK1 for a developer dev1. In
addition to the existing security setting, a system administrator is asked to set security permissions
for data capture so that the developer can perform the record and replay actions on the broker.
Which command does the system administrator need to run?
A. setmqaut -m BRK1 -n "SYSTEM.BROKER.DC.AUTH " -t q -p dev1 +inq +put +set
B. setmqaut -m BRK1 -n "SYSTEM.BROKER.DC.AUTH " -t q -p dev1 -all +inq +put
C. setmqaut -m BRK1 -n "SYSTEM.BROKER.AUTH.** " -t q -p dev1 +inq +put +set +get
D. setmqaut -m BRK1 -n "SYSTEM.BROKER.AUTH.** " -t q -p dev1 -all +inq +put +set +get
Answer: A
IBM examen 000-277 examen certification 000-277 000-277 000-277 examen
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A IBM 000-277. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test IBM 000-277 sans aucune doute.
没有评论:
发表评论