Si vous traviallez dur encore pour préparer le test de Microsoft 070-576-Csharp et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Microsoft 070-576-Csharp.
Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Microsoft 070-404 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Microsoft 070-404 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Microsoft 070-404.
Le test Microsoft 070-404 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Microsoft 070-404 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Microsoft 070-404 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Microsoft 070-404 avec l'aide de Pass4Test.
Code d'Examen: 070-576-Csharp
Nom d'Examen: Microsoft (PRO: Designing and Developing Microsoft SharePoint 2010 Applications)
Questions et réponses: 150 Q&As
Code d'Examen: 070-404
Nom d'Examen: Microsoft (TS: System Center Service Manager 2010, Configuring (available in 2010))
Questions et réponses: 165 Q&As
Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 070-576-Csharp très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 070-576-Csharp, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.
Pass4Test est un site d'offrir la bonne Q&A Microsoft 070-404. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.
Pass4Test possède un l'outil de formation particulier à propos de test Microsoft 070-576-Csharp. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Microsoft 070-576-Csharp offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.
070-576-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-576-Csharp.html
NO.1 You are designing a SharePoint 2010 solution that stores employee information in a list named
Employees and company information in a list named Company.
Each company has one or more employees.
You need to recommend that a developer add a new column so that a one-to-many relationship is created
between the Company list and Employees list.
Which approach should you recommend?
A. Add an External Data column on the Employees list.
B. Add a Lookup column on the Employees list.
C. Add a Managed Metadata column on the Company list.
D. Add a Lookup column on the Company list.
Answer: B
Microsoft 070-576-Csharp certification 070-576-Csharp 070-576-Csharp examen 070-576-Csharp 070-576-Csharp examen
NO.2 You are designing a SharePoint 2010 solution.
You need to design the solution to meet the following requirements:
.All sites must have a consistent structure when initially created.
.All sites must include a document library that contains Word documents with searchable properties.
.Site users must be able to generate a spreadsheet detailing the properties of the document library
contents.
Which approach should you recommend?
A. Create a feature to create the required site structure programmatically. Create a content type for the
document library. Create a custom workflow for the document library to allow users to generate the
spreadsheet.
B. Create a feature to create the required site structure programmatically. Use feature stapling to
associate the feature with all site definitions. Create a custom action for the standard document library to
allow users to generate the spreadsheet.
C. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom action for the document library to allow users to
generate the spreadsheet.
D. Create a custom site definition for the sites and allow only that site definition to be used. Create a
content type for the document library. Create a custom event receiver to allow users to generate the
spreadsheet.
Answer: C
Microsoft 070-576-Csharp 070-576-Csharp 070-576-Csharp examen
NO.3 You are designing an asset management solution using SharePoint 2010.
You need to design a solution that meets the following requirements:
.Binary large objects (BLOBs) cannot be stored in Microsoft SQL Server.
.There can be no custom development or third-party products.
Which approach should you recommend?
A. Install and configure Remote BLOB Storage and enable the content databases to use Remote BLOB
Storage.
B. Install and configure Remote BLOB Storage and enable the configuration databases to use Remote
BLOB Storage.
C. Install and configure an external BLOB store provider and enable the content databases to use the
external BLOB store provider.
D. Install and configure an external BLOB store provider and enable the configuration databases to use
the external BLOB store provider.
Answer: A
Microsoft examen 070-576-Csharp 070-576-Csharp 070-576-Csharp 070-576-Csharp examen
NO.4 You are designing a SharePoint 2010 information architecture plan for a client that specifies the
mechanics of implementing content type change control.
The requirements for the change control plan specify that:
.Site managers can create site-specific content types based on the content types in the parent site.
.Content types must not be overwritten when changes are made to parent site content types.
.Site managers can change child site content types.
You need to specify a content type change control plan that meets all these requirements.
Which approach should you recommend?
A. Direct the site manager to explicitly set the read-only property of the content type to true. Direct the site
collection manager to make the specified change required in the child site to the content type at the site
collection level.
B. Direct the site manager to explicitly set the read-only property of the content type to true. Perform a
push-down operation from the parent site to overwrite the required changes to the read-only content types
in all the child sites.
C. Define the content type as read-only at the child site level. Direct the site manager to explicitly set the
read-only property of the content type to false to make changes to the content type. Then change the
read-only property to true.
D. Define the content type as sealed. Direct the site manager to explicitly set the sealed property of the
content type to false to make changes to the content type. Then change the sealed property of the
content type to true.
Answer: C
Microsoft certification 070-576-Csharp 070-576-Csharp certification 070-576-Csharp
NO.5 You are designing a SharePoint 2010 application to store 50 GB of digital assets, including audio and
video files that are up to 20 MB in size.
You have the following requirements:
.The disk storage system must use standard hard drives and must be configured to optimize read
performance.
.The SharePoint 2010 database uses Microsoft SQL Server Express 2008.
.The application must leverage standard SharePoint 2010 components to limit the requirement for custom
development.
You need to design a storage solution that meets all of these requirements.
Which approach should you recommend?
A. Enable FILESTREAM storage for a Microsoft SQL Server Express 2008 database on a RAID 0 disk
system. Then install and configure remote Binary Large Object (BLOB) storage in SharePoint 2010.
B. Store the assets directly in Microsoft SQL Server Express 2008 and create multiple content databases
on a RAID 0 disk system.
C. Install and configure support for external BLOB storage for SharePoint 2010 and use the
ISPExternalBinaryProvider interface to manage files on a RAID 0 disk system.
D. Install and configure support for external BLOB storage for SharePoint 2010 and configure a Microsoft
SQL Server Express 2008 database to store BLOBs on a RAID 5 disk system.
Answer: A
Microsoft examen certification 070-576-Csharp certification 070-576-Csharp certification 070-576-Csharp
NO.6 You are helping an organization s executive team to design an automated approval process to
standardize certain documents.
You have the following requirements:
.The documents must be reviewed and approved by multiple teams in the approval chain.
.Each reviewer must provide feedback as part of completing a review.
.Each reviewer must either approve or reject the documents.
.After review, the document status must be changed; an e-mail must be generated to the document author
and the next reviewer in the approval chain; and a task should be created for the next reviewer in the
approval chain.
You must design a custom workflow solution for the document approval process on a SharePoint 2010
site.
What should the solution include?
A. an initiation form to collect the reviewer s feedback and a Simple activity to approve and reject the
document
B. an association form to collect the reviewer s feedback and a Composite activity to support conditional
activities such as approval and rejection
C. a task form to collect the reviewer s feedback and a Composite activity to support conditional activities
such as approval and rejection
D. a task form to collect the reviewer s feedback and a Simple activity to approve and reject the document
Answer: C
Microsoft certification 070-576-Csharp 070-576-Csharp examen certification 070-576-Csharp 070-576-Csharp examen
NO.7 You are designing a SharePoint 2010 application that includes a Task list.
You have the following requirements:
.For each task, allow users to specify one of three values for an item named Phase using a drop-down
menu.
.Allow contributors to add new values for the Phase item.
You need to design this application without using custom code.
Which approach should you recommend?
A. Create a Multiple lines of text field type on the Task list.
B. Create a Single line of text field type on the Task list.
C. Create a Choice field type on the Task list that gets values from a custom list.
D. Create a Lookup field type on the Task list that gets values from a custom list.
Answer: D
Microsoft 070-576-Csharp certification 070-576-Csharp
NO.8 You are designing a SharePoint 2010 feature. The feature includes a feature receiver that executes
code on activation and deactivation.
The feature receiver code interacts with a Web service, which could cause errors beyond your control.
You need to ensure that the feature does not activate or deactivate if the Web service causes an error.
Which approach should you recommend?
A. Wrap your code in a try-catch block. Log the error and issue another request to the Web service in the
catch block.
B. Wrap your code in a try-catch block. Log the error and throw an exception in the catch block.
C. Wrap your code in a try-catch block. Only catch exceptions of type SPException.
D. Wrap your code in a try-finally block. Log any issues your code encounters in the finally block.
Answer: B
Microsoft 070-576-Csharp examen 070-576-Csharp examen certification 070-576-Csharp
没有评论:
发表评论